Relubrication

To maximize bearing life, be sure you relubricate units with a NLGI #2-compatible grease at intervals recommended for your application. Optimal intervals are based on the dn* value (inner ring diameter in mm x speed in RPM) and operating environment of your application.
General guidelines include:

dn* ValueEnvironmental ConditionsOperating Temperature (F)Interval
Up to 40,000Ordinary5 to 1506-12 months
Up to 40,000Ordinary150 to 2102-6 months
40,000 to 70,000Ordinary5 to 1502-6 months
40,000 to 70,000Ordinary150 to 210Monthly
Up to 70,000Dirty5 to 150Weekly to Monthly
Up to 70,000Dirty150 to 210Daily to 2 Weeks
Up to 70,000Very DirtyAnyDaily to Weekly
Up to 70,000Very DirtyAnyDaily

* d – inner ring diameter (mm); n = speed in RPM

Grease Fill Amounts

Relubricating bearings with the appropriate grease fill amount is critical to bearing life. For optimal distribution, apply lubricant through the grease fitting under low pressure during slow shaft rotation. Be careful not to overfill the bearing because it can cause seals to overheat and unseat.

Grease fill amounts should be based on your application experience. General guidelines include:

Bore Size Grease Amount
Up to 1"1.5 – 2 grams
1 1/8 to 1-1/2"2.5 – 3 grams
1 7/16 to 2-7/16"4 – 5 grams
2 1/2 to 3-1/2"7 – 8 grams